SH7147 Datasheet, PDF (38/1108 Pages) Renesas Technology Corp – 32-Bit RISC Microcomputer SuperH™ RISC engine Family

Section 1 Overview
Classification
Symbol
I/O
Controller area
CTx1*, CTx0 O
network (RCAN-ET) _{CRx1*, CRx0 I}
A/D converter
(ADC)
AN15 to AN0 I
ADTRG
I
AVcc
I
AVss
I
AVrefh
I
AVrefl
I
I/O ports
User break
controller (UBC)
PA15 to PA0 I/O
PB7 to PB0 I/O
PD10 to PD0 I/O
PE21 to PE0 I/O
UBCTRG O
Name
Function
Transmit data Transmit data pin for CAN bus
Receive data Receive data pin for CAN bus
Analog input pins Analog input pins
A/D conversion External trigger input pin for starting
trigger input
A/D conversion
Analog power
supply
Power supply pin for the A/D
converter
Connect it to the system power
supply (PVcc) when the A/D
converter is not used.
Connect all AVcc pins to the system
power supply (PVcc) The A/D
converter does not work if any pin is
open.
Analog ground Ground pin for the A/D converter
Connect it to the system ground (0
V).
Connect all AVss pins to the system
ground (0 V) correctly. The A/D
converter does not work if any pin is
open.
Analog reference Analog reference power supply
power supply (high)
(high)
Analog reference Analog reference power supply (low)
power supply
(low)
General port
General input/output port pins
General port
General input/output port pins
General port
General input/output port pins
General port
General input/output port pins
User break
trigger output
Trigger output pin for UBC condition
match
Rev. 3.00 Oct. 06, 2008 Page 14 of 1080
REJ09B0230-0300