SH7265 Datasheet, PDF (742/2024 Pages) Renesas Technology Corp – Renesas 32-Bit RISC Microcomputer SuperHTM RISC engine Family / SH7260 Series

Section 15 Realtime Clock (RTC)
15.3.2 Second Counter (RSECCNT)
RSECCNT is used for setting/counting in the BCD-coded second section. The count operation is
performed by a carry for each second of the 64-Hz counter.
The assignable range is from 00 through 59 (practically in BCD), otherwise operation errors
occur. Carry out write processing after stopping the count operation through the setting of the
START bit in RCR2.
BIt: 7
6
5
4
3
2
1
0
-
10 seconds
1 second
Initial value: 0
-
-
-
-
-
-
-
R/W: R R/W R/W R/W R/W R/W R/W R/W
Bit
7
6 to 4
3 to 0
Initial
Bit Name Value
R/W

0
R
10 seconds Undefined R/W
1 second Undefined R/W
Description
Reserved
This bit is always read as 0. The write value should
always be 0.
Counting Ten's Position of Seconds
Counts on 0 to 5 for 60-seconds counting.
Counting One's Position of Seconds
Counts on 0 to 9 once per second. When a carry is
generated, 1 is added to the ten's position.
Rev. 1.00 Mar. 14, 2008 Page 706 of 1984
REJ09B0351-0100