SH7265 Datasheet, PDF (1630/2024 Pages) Renesas Technology Corp – Renesas 32-Bit RISC Microcomputer SuperHTM RISC engine Family / SH7260 Series

Section 30 Pin Function Controller (PFC)
(6) Port B Control Register L1 (PBCRL1)
Bit: 15 14 13 12 11 10 9
8
7
6
5
4
3
2
1
0
PB3MD[3:0]
PB2MD[3:0]
PB1MD[3:0]
PB0MD[3:0]
Initial value: 0
0
0
0
0
0
0
0
0
0
0 0/1* 0
0
0
0
R/W: R/W R/W R/W R/W R/W R/W R/W R/W R/W R/W R/W R/W R/W R/W R/W R/W
Initial
Bit
Bit Name Value R/W Description
15 to 12 PB3MD[3:0] 0000 R/W PB3 Mode
Select the function of the PB3.
11 to 8 PB2MD[3:0] 0000 R/W PB2 Mode
Select the function of the PB2.
7 to 4
PB1MD[3:0] 0001/
0000*
R/W
PB1 Mode
Select the function of the PB1.
3 to 0 PB0MD[3:0] 0000 R/W PB0 Mode
Select the function of the PB0.
Note: * The initial value is 0001 in 16-bit mode (MD = 0), and 0000 in 32-bit mode (MD= 1).
30.2.6 Port C I/O Register L (PCIORL)
PCIORL is a 16-bit readable/writable register that is used to set the pins on port C as inputs or
outputs. The PC10IOR to PC0IOR bits correspond to the PC10 to PC0 pins, respectively. The
setting of PCIORL is valid for the pins for which general I/O function or TIOC I/O function of the
MTU2 is selected. PCIORL has no effect on the pins for which other function is selected. If a bit
in PCIORL is set to 1, the corresponding pin on port C functions as an output pin. If it is cleared to
0, the corresponding pin functions as an input pin.
Bits 15 to 11 in PCIORL are reserved. These bits are always read as 0. The write value should
always be 0.
Bit: 15 14 13 12 11 10 9
8
7
6
5
4
3
2
1
0
-
-
-
-
-
PC10 PC9 PC8 PC7 PC6 PC5 PC4 PC3 PC2 PC1 PC0
IOR IOR IOR IOR IOR IOR IOR IOR IOR IOR IOR
Initial value: 0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
R/W: R
R
R
R
R R/W R/W R/W R/W R/W R/W R/W R/W R/W R/W R/W
Rev. 1.00 Mar. 14, 2008 Page 1594 of 1984
REJ09B0351-0100