SH7265 Datasheet, PDF (312/2024 Pages) Renesas Technology Corp – Renesas 32-Bit RISC Microcomputer SuperHTM RISC engine Family / SH7260 Series

Section 10 Bus State Controller (BSC)
10.4.2 CSn Recovery Cycle Setting Register (CSnREC) (n = 0 to 5)
CSnREC specifies the number of data recovery cycles to be inserted after read or write accesses.
Bit: 31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
-
-
-
-
WRCV[3:0]
-
-
-
-
RRCV[3:0]
Initial value: 0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
R/W: R
R
R
R R/W R/W R/W R/W R
R
R
R R/W R/W R/W R/W
Bit: 15 14 13 12 11 10 9
8
7
6
5
4
3
2
1
0
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
Initial value: 0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
R/W: R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
Bit
Bit Name
31 to 28 
Initial
Value
All 0
27 to 24 WRCV[3:0] 0000
23 to 20 
All 0
R/W Description
R Reserved
These bits are always read as 0. The write value should
always be 0.
R/W Post-Write Data Recovery Cycle Setting
These bits specify the number of data recovery cycles to
be inserted after write accesses to the external bus. If a
value other than 0 is selected, 1 to 15 data recovery
cycles are inserted when a write access to the external
bus is followed by a read access to the external bus.
(Data recovery cycles are inserted even when access is
performed sequentially to the same CSC channel.) Note
that if idle cycles occur between accesses to the external
bus, the number of data recovery cycles inserted is
reduced by the number of idle cycles.
0000: 0 cycles
0001: 1 cycle
:
1111: 15 cycles
R Reserved
These bits are always read as 0. The write value should
always be 0.
Rev. 1.00 Mar. 14, 2008 Page 276 of 1984
REJ09B0351-0100