SH7265 Datasheet, PDF (1313/2024 Pages) Renesas Technology Corp – Renesas 32-Bit RISC Microcomputer SuperHTM RISC engine Family / SH7260 Series

Section 25 USB 2.0 Host/Function Module (USB)
25.3.29 USB Request Value Register (USBVAL)
USBVAL is a register for storing setup requests for control transfer.
When the function controller function is selected, the value of wValue that has been received is
stored.
When the host controller function is selected, the value of wValue to be transmitted should be set.
After setting SUREQ to 1, do not rewrite this register until 0 is read from SUREQ.
This register is initialized by a power-on reset or a USB bus reset.
Bit: 15 14 13 12 11 10 9
8
7
6
5
4
3
2
1
0
WVALUE[15:0]
Initial value: 0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
R/W: R/W* R/W* R/W* R/W* R/W* R/W* R/W* R/W* R/W* R/W* R/W* R/W* R/W* R/W* R/W* R/W*
Bit
Bit Name
Initial
Value
R/W Description
15 to 0 WVALUE[15:0] H'0000 R/W* Value
These bits store the wValue value of a USB
request.
Note: * When the function controller function is selected, these bits are read-only. When the
host controller function is selected, these bits can be read and written to.
Rev. 1.00 Mar. 14, 2008 Page 1277 of 1984
REJ09B0351-0100