C8051F93X Datasheet, PDF (77/330 Pages) Silicon Laboratories – Pipelined intstruction architecture executes 70 of instruction in 1 or 2 system clocks

C8051F93x-C8051F92x
SFR Definition 5.3. ADC0AC: ADC0 Accumulator Configuration
Bit
7
6
5
4
3
2
1
0
Name Reserved
Type
R/W
AD0AE
W
AD0SJST
R/W
AD0RPT
R/W
Reset
0
0
0
0
0
0
0
0
SFR Page = 0x0; SFR Address = 0xBA
Bit
Name
Function
7
Reserved Reserved.
Read = 0b.
6
AD0AE
ADC0 Accumulate Enable.
Enables multiple conversions to be accumulated when burst mode is disabled.
0: ADC0H:ADC0L contain the result of the latest conversion when Burst Mode is
disabled.
1: ADC0H:ADC0L contain the accumulated conversion results when Burst Mode
is disabled. Software must write 0x0000 to ADC0H:ADC0L to clear the accumu-
lated result.
This bit is write-only. Always reads 0b.
5:3 AD0SJST[2:0] ADC0 Accumulator Shift and Justify.
Specifies the format of data read from ADC0H:ADC0L.
000: Right justified. No shifting applied.
001: Right justified. Shifted right by 1 bit.
010: Right justified. Shifted right by 2 bits.
011: Right justified. Shifted right by 3 bits.
100: Left justified. No shifting applied.
All remaining bit combinations are reserved.
2:0 AD0RPT[2:0] ADC0 Repeat Count.
Selects the number of conversions to perform and accumulate in Burst Mode.
This bit field must be set to 000 if Burst Mode is disabled.
000: Perform and Accumulate 1 conversion.
001: Perform and Accumulate 4 conversions.
010: Perform and Accumulate 8 conversions.
011: Perform and Accumulate 16 conversions.
100: Perform and Accumulate 32 conversions.
101: Perform and Accumulate 64 conversions.
All remaining bit combinations are reserved.
Rev. 1.3
77