HD64F3028F25 Datasheet, PDF (681/925 Pages) Renesas Technology Corp – Hardware Manual Renesas 16-Bit Single-Chip Microcomputer H8 Family/H8/300H Series

Item
Symbol Min
Typ Max
Unit Test Conditions
Three-state Ports 1 to 6 |ITSI|
—
leakage
Ports 8 to B
current
RESO
—
Input pull-up Ports 2, 4,
–Ip
10
MOS current and 5
—
1.0
—
10.0
—
300
µA Vin = 0.5 V to
VCC – 0.5 V
µA Vin = 0 V
µA Vin = 0 V
Input
NMI
Cin
—
capacitance _{All input pins}
—
except NMI
Current
Normal
dissipation^*2 operation
ICC^*3
—
—
50
—
15
37
58
(3.3 V)
pF Vin = 0 V
pF
f = fmin
Ta = 25°C
mA f = 25 MHz
Sleep mode
—
29
47
mA
(3.3 V)
Module
standby mode
—
21
37
mA
(3.3 V)
Standby mode
—
—
Analog
During A/D
AICC
—
power supply conversion
current
During A/D
—
and D/A
conversion
1.0
10
—
80
0.6
1.5
0.6
1.5
µA Ta ≤ 50°C
µA 50°C < Ta
mA
mA
Idle
—
0.01 5.0
µA DASTE = 0
Reference During A/D
AICC
—
0.45 0.8
mA
current
conversion
During A/D
and D/A
conversion
—
2.0
3.0
mA
Idle
—
0.01 5.0
µA DASTE = 0
RAM standby voltage
VRAM
2.0
—
—
V
Notes: 1. If the A/D converter is not used, do not leave the AVCC, VREF, and AVSS pins open.
Connect AVCC and VREF to VCC, and connect AVSS to VSS.
2. Current dissipation values are for VIH min = VCC – 0.5 V and VIL max = 0.5 V with all
output pins unloaded and the on-chip MOS pull-up transistors in the off state.
The values are for VRAM ≤ VCC < 3.0 V, VIH min = VCC × 0.9, and VIL max = 0.3 V.
3. ICC max. (normal operation)
= 6.0 (mA) + 0.577 (mA/(MHz × V)) × VCC × f
ICC max. (sleep mode) = 6.0 (mA) + 0.455 (mA/(MHz × V)) × VCC × f
ICC max. (sleep mode + module standby mode)
= 6.0 (mA) + 0.344 (mA/(MHz × V)) × VCC × f
The Typ values for power consumption are reference values.
Rev. 2.00, 09/03, page 649 of 890