English
Language : 

HD64F3028F25 Datasheet, PDF (221/925 Pages) Renesas Technology Corp – Hardware Manual Renesas 16-Bit Single-Chip Microcomputer H8 Family/H8/300H Series
Section 7 DMA Controller
7.1 Overview
The H8/3028 Group has an on-chip DMA controller (DMAC) that can transfer data on up to four
channels.
When the DMA controller is not used, it can be independently halted to conserve power. For
details see section 20.6, Module Standby Function.
7.1.1 Features
DMAC features are listed below.
• Selection of short address mode or full address mode
Short address mode
 8-bit source address and 24-bit destination address, or vice versa
 Maximum four channels available
 Selection of I/O mode, idle mode, or repeat mode
• Full address mode
 24-bit source and destination addresses
 Maximum two channels available
 Selection of normal mode or block transfer mode
• Directly addressable 16-Mbyte address space
• Selection of byte or word transfer
• Activation by internal interrupts, external requests, or auto-request (depending on transfer
mode)
 16-bit timer compare match/input capture interrupts (×3)
 Serial communication interface (SCI channel 0) transmit-data-empty/receive-data-full
interrupts
 External requests
 Auto-request
 A/D converter conversion-end interrupt
Rev. 2.00, 09/03, page 189 of 890