HD64F3028F25 Datasheet, PDF (320/925 Pages) Renesas Technology Corp – Hardware Manual Renesas 16-Bit Single-Chip Microcomputer H8 Family/H8/300H Series

PADDR is initialized to H'00 by a reset and in hardware standby mode in modes 1, 2, 5, 6, and 7.
It is initialized to H'80 by a reset and in hardware standby mode in modes 3 and 4. In software
standby mode it retains its previous setting. Therefore, if a transition is made to software standby
mode while port A is functioning as an input/output port and a PADDR bit is set to 1, the
corresponding pin maintains its output state.
Port A Data Register (PADR): PADR is an 8-bit readable/writable register that stores output
data for port A. When port A functions as an output port, the value of this register is output. When
a bit in PADDR is set to 1, if port A is read the value of the corresponding PADR bit is returned.
When a bit in PADDR is cleared to 0, if port A is read the corresponding pin logic level is read.
Bit
Initial value
Read/Write
7
PA ₇
0
R/W
6
PA ₆
0
R/W
5
PA ₅
0
R/W
4
PA ₄
0
R/W
3
PA ₃
0
R/W
2
PA ₂
0
R/W
1
PA ₁
0
R/W
0
PA ₀
0
R/W
Port A data 7 to 0
These bits store data for port A pins
PADR is initialized to H'00 by a reset and in hardware standby mode. In software standby mode it
retains its previous setting.
Rev. 2.00, 09/03, page 288 of 890