English
Language : 

HD64F3028F25 Datasheet, PDF (545/925 Pages) Renesas Technology Corp – Hardware Manual Renesas 16-Bit Single-Chip Microcomputer H8 Family/H8/300H Series
Section 14 Smart Card Interface
14.1 Overview
An IC card (smart card) interface conforming to the ISO/IEC 7816-3 (Identification Card)
standard is supported as an extension of the serial communication interface (SCI) functions.
Switchover between the normal serial communication interface and the smart card interface is
controlled by a register setting.
14.1.1 Features
Features of the smart card interface supported by the H8/3028 Group are listed below.
• Asynchronous communication
 Data length: 8 bits
 Parity bit generation and checking
 Transmission of error signal (parity error) in receive mode
 Error signal detection and automatic data retransmission in transmit mode
 Direct convention and inverse convention both supported
• Built-in baud rate generator allows any bit rate to be selected
• Three interrupt sources
 There are three interrupt sources—transmit-data-empty, receive-data-full, and
transmit/receive error—that can issue requests independently.
 The transmit-data-empty interrupt and receive-data-full interrupt can activate the DMA
controller (DMAC) to execute data transfer.
Rev. 2.00, 09/03, page 513 of 890