HD64F3028F25 Datasheet, PDF (611/925 Pages) Renesas Technology Corp – Hardware Manual Renesas 16-Bit Single-Chip Microcomputer H8 Family/H8/300H Series

Bit 2—Program-Verify Mode (PV): Selects program-verify mode transition or clearing. (Do not
set the SWE, ESU, PSU, EV, E, or P bit at the same time.)
Bit 2
PV
0
1
Description
Program-verify mode cleared
Transition to program-verify mode
[Setting condition]
When FWE = 1 and SWE = 1
(Initial value)
Bit 1—Erase Mode (E): Selects erase mode transition or clearing. (Do not set the SWE, ESU,
PSU, EV, PV, or P bit at the same time.)
Bit 1
E
Description
0
Erase mode cleared
1
Transition to erase mode
[Setting condition]
When FWE = 1, SWE = 1, and ESU = 1
Note: Do not access the flash memory while the E bit is set.
(Initial value)
Bit 0—Program (P): Selects program mode transition or clearing. (Do not set the SWE, ESU,
PSU, EV, PV, or E bit at the same time.)
Bit 0
P
Description
0
Program mode cleared
1
Transition to program mode
[Setting condition]
When FWE = 1, SWE = 1, and PSU = 1
Note: Do not access the flash memory while the P bit is set.
(Initial value)
Rev. 2.00, 09/03, page 579 of 890