HD6413008VF25 Datasheet, PDF (311/688 Pages) Renesas Technology Corp – Old Company Name in Catalogs and Other Documents

φ
8TCNT
TCORB
Input capture signal
9. 8-Bit Timers
N
N
CMFB
Figure 9.15 CMFB Flag Setting Timing when Input Capture Occurs
Timing of Overflow Flag (OVF) Setting: The OVF flag in 8TCSR is set to 1 by the overflow
signal generated when 8TCNT overflows (from H'FF to H'00). Figure 9.16 shows the timing in
this case.
φ
8TCNT
Overflow signal
H'FF
H'00
OVF
Figure 9.16 Timing of OVF Setting
9.4.5 Operation with Cascaded Connection
If bits CKS2 to CKS0 are set to (100) in either 8TCR0 or 8TCR1, the 8-bit timers of channels 0
and 1 are cascaded. With this configuration, the two timers can be used as a single 16-bit timer
(16-bit timer mode), or channel 0 8-bit timer compare matches can be counted in channel 1
(compare match count mode). Similarly, if bits CKS2 to CKS0 are set to (100) in either 8TCR2 or
8TCR3, the 8-bit timers of channels 2 and 3 are cascaded. With this configuration, the two timers
can be used as a single 16-bit timer (16-bit timer mode),or channel 2 8-bit timer compare matches
can be counted in channel 3 (compare match count mode). In this case, the timer operates as
below.
Rev.4.00 Aug. 20, 2007 Page 265 of 638
REJ09B0395-0400