HD64F38024HV Datasheet, PDF (45/684 Pages) Renesas Technology Corp – Hardware Manual Renesas 8-Bit Single-Chip Microcomputer H8 Family/H8/300L Super Low Power Series

Section 1 Overview
Pin No.
Type
FP-80A
Symbol TFP-80C FP-80B TLP-85V
I/O ports P77 to
P70
36 to 29
38 to 41 J8, J7
K6, H7
H6, J7
H6, J5
J6, H5
P87 to
P80
44 to 37
46 to 39 H9, J9
H10, J10
K8, K9
H8, K7
P95 to
P90
59 to 54
61 to 56 B10, C8
D10, C9
D9, E10
PA3 to
PA0
45 to 48
47 to 50 G10
G8
G9
F10
PB7 to
PB0
Serial
RXD32
communi-
cation
(SCI)
TXD32
80 to 73
70
2, 1, A3, A2
80 to 75 C3, A4
B3, B4
A5, C4
72
B5
71
73
B6
SCK32 69
71
C6
A/D
AN7 to
converter AN0
80 to 73
2, 1, A3, A2
80 to 75 C3, A4
B3, B4
A5, C4
Pad Pad Pad
No.^*1 No.^*2 No.^*3 I/O
Name and Functions
37 to 38 to 36 to I/O
30 31 29
Port 7: This is an 8-bit I/O
port. Input or output can
be designated for each bit
by means of port control
register 7 (PCR7).
45 to 46 to 44 to I/O
38 39 37
Port 8: This is an 8-bit I/O
port. Input or output can
be designated for each bit
by means of port control
register 8 (PCR8).
60 to
55
61 to
56
59 to
54
Output Port 9: This is a 6-bit
output port. If the on-chip
emulator is used, pin 95 is
reserved for the emulator
and not available to the
user. In the case of the
F-ZTAT version, pin 95
should not be left open in
the user mode, and
should instead be pulled
up to high level.
46 to 47 to 45 to I/O
49 50 48
Port A: This is a 4-bit I/O
port. Input or output can
be designated for each bit
by means of port control
register A (PCRA).
81 to 1, 80 to Input
74 81 to 73
75
Port B: This is an 8-bit
input port.
71 72 70 Input SCI3 receive data input:
This is the SCI3 data
input pin.
72 73 71 Output SCI3 transmit data
output: This is the SCI3
data output pin.
70 71 69 I/O
SCI3 clock I/O: This is
the SCI3 clock I/O pin.
81 to 1, 80 to Input
74 81 to 73
75
Analog input channels 7
to 0: These are analog
data input channels to the
A/D converte.
Rev. 8.00 Mar. 09, 2010 Page 23 of 658
REJ09B0042-0800