HD64F38024HV Datasheet, PDF (185/684 Pages) Renesas Technology Corp – Hardware Manual Renesas 8-Bit Single-Chip Microcomputer H8 Family/H8/300L Super Low Power Series

Section 6 ROM
6.6.2 Flash Memory Control Register 2 (FLMCR2)
Bit
7
6
5
4
3
2
1
0
FLER
—
—
—
—
—
—
—
Initial value
0
0
0
0
0
0
0
0
Read/Write
R
—
—
—
—
—
—
—
FLMCR2 is a register that displays the state of flash memory programming/erasing. FLMCR2 is a
read-only register, and should not be written to.
Bit 7—Flash Memory Error (FLER)
This bit is set when the flash memory detects an error and goes to the error-protection state during
programming or erasing to the flash memory. See section 6.9.3, Error Protection, for details.
Bit 7
FLER
0
1
Description
The flash memory operates normally.
(initial value)
Indicates that an error has occurred during an operation on flash memory
(programming or erasing).
Bits 6 to 0—Reserved
These bits are always read as 0 and cannot be modified.
Rev. 8.00 Mar. 09, 2010 Page 163 of 658
REJ09B0042-0800