HD64F38024HV Datasheet, PDF (443/684 Pages) Renesas Technology Corp – Hardware Manual Renesas 8-Bit Single-Chip Microcomputer H8 Family/H8/300L Super Low Power Series

Section 13 LCD Controller/Driver
13.2.4 Clock Stop Register 2 (CKSTPR2)
Bit
7
6
LVDCKSTP^* ⎯
Initial value
1
1
Read/Write
R/W
⎯
5
4
3
2
1
0
⎯ PW2CKSTP AECKSTP WDCKSTP PW1CKSTP LDCKSTP
1
1
1
1
1
1
⎯
R/W
R/W R/W
R/W R/W
Note: * Bits 6 and 5 are also reserved on products other than the H8/38124 Group.
CKSTPR2 is an 8-bit read/write register that performs module standby mode control for peripheral
modules. Only the bit relating to the LCD controller/driver is described here. For details of the
other bits, see the sections on the relevant modules.
Bit 0—LCD Controller/Driver Module Standby Mode Control (LDCKSTP)
Bit 0 controls setting and clearing of module standby mode for the LCD controller/driver.
Bit 0
LDCKSTP
0
1
Description
LCD controller/driver is set to module standby mode
LCD controller/driver module standby mode is cleared
(initial value)
Rev. 8.00 Mar. 09, 2010 Page 421 of 658
REJ09B0042-0800