HD64F38024HV Datasheet, PDF (400/684 Pages) Renesas Technology Corp – Hardware Manual Renesas 8-Bit Single-Chip Microcomputer H8 Family/H8/300L Super Low Power Series

Section 10 Serial Communication Interface
Notes: 1. When switching from transmission to simultaneous transmission/reception, check that
SCI3 has finished transmitting and that bits TDRE and TEND are set to 1, clear bit TE
to 0, and then set bits TE and RE to 1 simultaneously.
2. When switching from reception to simultaneous transmission/reception, check that
SCI3 has finished receiving, clear bit RE to 0, then check that bit RDRF and the error
flags (OER, FER, and PER) are cleared to 0, and finally set bits TE and RE to 1
simultaneously.
Rev. 8.00 Mar. 09, 2010 Page 378 of 658
REJ09B0042-0800