UPD784938 Datasheet, PDF (715/733 Pages) NEC – 16-Bit Single-Chip Microcontrollers

APPENDIX A DEVELOPMENT TOOLS
A.3.1 Hardware (2/2)
(2) When using the in-circuit emulator IE-784000-R
IE-784000-R
In-circuit emulator
The IE-784000-R is an in-circuit emulator that can be used in all members of the 78K/IV
Series.
Use in combination with the separately purchased IE-784000-R-EM and IE-784937-NS-
EM1. For debugging, connect to the host machine. Using in combination with the
mandatory, separately purchased, integrated debugger (ID78K4) and device file, allows
debugging on the source program level in C language and structured assembly language.
The C0 coverage function provides efficient debugging and program inspection.
Connecting with the host machine by either Ethernet™ or a dedicated bus requires a
separately purchased interface adapter.
IE-70000-98-IF-C
Interface adapter
This adapter is required when using the PC-9800 Series computer (except notebook type)
as the IE-784000-R host machine (C bus supported).
IE-70000-PC-IF-C
Interface adapter
IE-78000-R-SV3
Interface adapter
This adapter is required when using the IBM PC/AT or compatibles as the IE-784000-R
host machine (ISA bus supported).
This is adapter and cable required when using an EWS computer as the IE-784000-R host
machine, and is used connected to the board in the IE-784000-R.
10Base-5 is supported for Ethernet, but a commercially available conversion adapter is
required for other formats.
IE-784000-R-EM
Emulation board
IE-784937-NS-EM1^Note or
IE-784937-SL-EM1
Emulation board
IE-78K4-R-EX3^Note
Emulation probe
conversion board
The emulation board that is used with all units in the 78K/IV Series.
Board for emulating peripheral hardware that is inherent to a device.
100-pin conversion board required when using the IE-784937-NS-EM1 on the IE-784000-R.
EP-78064GF-R
Emulation probe
This probe is used to connect the in-circuit emulator to the target system and is designed
for 100-pin plastic QFP (GF-3BA type).
EV-9200GF-100
Conversion socket
(Refer to Figures
A-2 and A-3)
This conversion socket connects the EP-78064GF-R to the target system board designed
to mount a 100-pin plastic QFP (GF-3BA type).
Note Under development
Remark EV-9200GF-100 is sold in units of five.
Preliminary User’s Manual U13987EJ1V0UM00
715