82583V Datasheet, PDF (275/374 Pages) Intel Corporation – Intel® 82583V GbE Controller

Driver Programing Interface—82583V GbE Controller
9.2.8.7
Bits
Field
Mode HW Rst SW Rst
Description
10
Pause
Capable
RO
9
100BASE-T4
Capability
RO
100BASE-TX
8
Full-Duplex RO
Capability
100BASE-TX
7
Half-Duplex RO
Capability
10BASE-T
6
Full-Duplex RO
Capability
10BASE-T
5
Half-Duplex RO
Capability
4:0 Selector Field RO
0x0
0x0
0x0
0x0
0x0
0x0
0x00
0x0
0x0
0x0
0x0
0x0
0x0
0x00
Received Code Word Bit 10.
1b = Link partner is capable of pause operation.
0b = Link partner is not capable of pause operation.
Received Code Word Bit 9.
1b = Link partner is 100BASE-T4 capable.
0b = Link partner is not 100BASE-T4 capable.
Received Code Word Bit 8.
1b = Link partner is 100BASE-TX full-duplex capable.
0b = Link partner is not 100BASE-TX full-duplex capable.
Received Code Word Bit 7.
1b = Link partner is 100BASE-TX half-duplex capable.
0b = Link partner is not 100BASE-TX half-duplex
capable.
Received Code Word Bit 6.
1b = Link partner is 10BASE-T full-duplex capable.
0b = Link partner is not 10BASE-T full-duplex capable.
Received Code Word Bit 5.
1b = Link partner is 10BASE-T half-duplex capable.
0b = Link partner is not 10BASE-T half-duplex capable.
Selector Field Received Code Word Bit 4:0.
Auto-Negotiation Expansion Register (Any Page), PHY Address 01;
Register 6
Bits
Field
Mode HW Rst SW Rst
Description
15:5 Reserved
RO
0x000
4
Parallel
Detection Fault
RO,LH
0x0
3
Link Partner
Next page Able
RO
0x0
2
Local Next
Page Able
RO
0x1
1
Page Received
RO,
LH
0x0
Link Partner
0
Auto-
Negotiation
RO
0x0
Able
0x000
0x0
0x0
0x1
0x0
0x0
Reserved. Must be 00000000000.
Register 6.4 is not valid until the auto-negotiation
complete bit (Reg 1.5) indicates completed.
1b = A fault has been detected via the parallel
detection function.
0b = A fault has not been detected via the parallel
detection function.
Register 6.3 is not valid until the auto-negotiation
complete bit (Reg 1.5) indicates completed.
1b = Link partner is next page able.
0b = Link partner is not next page able.
Register 6.2 is not valid until the auto-negotiation
complete bit (Reg 1.5) indicates completed.
1b = Local device is next page able.
0b = Local device is not next page able.
Register 6.1 is not valid until the auto-negotiation
complete bit (Reg 1.5) indicates completed.
1b = A new page has been received.
0b = A new page has not been received.
Register 6.0 is not valid until the auto-negotiation
complete bit (Reg 1.5) indicates completed.
1b = Link partner is auto-negotiation able.
0b = Link partner is not auto-negotiation able.
275