82583V Datasheet, PDF (10/374 Pages) Intel Corporation – Intel® 82583V GbE Controller

82583V GbE Controller—Introduction
1.0
1.1
1.2
Introduction
The 82583V is a single, compact, low power components that offer a fully-integrated
Gigabit Ethernet Media Access Control (MAC) and Physical Layer (PHY) port. The
82583V uses the PCI Express* (PCIe*) architecture and provides a single-port
implementation in a relatively small area so it can be used for server and client
configurations as a LAN on Motherboard (LOM) design. The 82583V can also be used in
embedded applications such as switch add-on cards and network appliances.
External interfaces provided on the 82583V:
• PCIe Rev. 1.1 (2.5 GHz) x1
• MDI (Copper) standard IEEE 802.3 Ethernet interface for 1000BASE-T, 100BASE-
TX, and 10BASE-T applications (802.3, 802.3u, and 802.3ab)
• IEEE 1149.1 JTAG (note that BSDL testing is NOT supported)
Additional product details:
• 9 mm x 9 mm 64-pin QFN package
• Support for PCI 3.0 Vital Product Data (VPD)
Scope
This document presents the architecture (including device operation, pin descriptions,
register definitions, etc.) for the 82583V. This document is intended to be a reference
for software device driver developers, board designers, test engineers, or others who
might need specific technical or programming information about the 82583V.
Number Conventions
Unless otherwise specified, numbers are represented as follows:
• Hexadecimal numbers are identified by an "0x" suffix on the number (0x2A, 0x12).
• Binary numbers are identified by a "b" suffix on the number (0011b).
Any other numbers without a suffix are intended as decimal numbers.
10