|
HD6433044 Datasheet, PDF (72/867 Pages) Hitachi Semiconductor – Hitachi Single-Chip Microcomputer | |||
|
◁ |
3.2 Mode Control Register (MDCR)
MDCR is an 8-bit read-only register that indicates the current operating mode of the
H8/3048 Series.
Bit
Initial value
Read/Write
7
6
â
â
1
1
â
â
Reserved bits
5
4
3
â
â
â
0
0
0
â
â
â
Reserved bits
Note: * Determined by pins MD2 to MD0 .
2
MDS2
â*
R
1
MDS1
â*
R
0
MDS0
â*
R
Mode select 2 to 0
Bits indicating the current
operating mode
Bits 7 and 6âReserved: Read-only bits, always read as 1.
Bits 5 to 3âReserved: Read-only bits, always read as 0.
Bits 2 to 0âMode Select 2 to 0 (MDS2 to MDS0): These bits indicate the logic levels at pins
MD2 to MD0 (the current operating mode). MDS2 to MDS0 correspond to MD2 to MD0. MDS2
to MDS0 are read-only bits. The mode pin (MD2 to MD0) levels are latched into these bits when
MDCR is read.
57
|
▷ |