HD6433044 Datasheet, PDF (683/867 Pages) Hitachi Semiconductor – Hitachi Single-Chip Microcomputer

Table 21-10 DC Characteristics (cont)
Conditions: V_CC = 5.0 V ± 10%, AV_CC = 5.0 V ± 10%, V_REF = 4.5 V to AV_CC ,
V_SS = AV_SS = 0 V^*1, T_a = –20°C to +75°C (regular specifications),
T_a = –40°C to +85°C (wide-range specifications)
Item
Symbol Min
Typ
Max Unit Test Conditions
Input leakage STBY, NMI, |I_in|
—
—
1.0
µA V_in = 0.5 to
current
RES, MD₁,
V_CC – 0.5 V
MD₀
MD₂
—
—
10.0 µA V_in = 0.5 to
V_CC + 0.5 V
MD₂
—
—
50.0 µA V_in = V_CC +
0.5 to 12.6 V
Port 7
—
—
1.0
µA V_in = 0.5 to
AV_CC – 0.5 V
Three-state Ports 1, 2,
|I_TS1|
—
—
1.0
µA V_in = 0.5 to
leakage
3, 4, 5, 6,
V_CC – 0.5 V
current
8 to B
(off state)
RESO/V_PP
—
—
20.0 mA V_CC to 5 V <
V_in ≤ 12.6 V
—
—
10.0 µA 0.5 V ≤ V_in ≤
V_CC to 0.5 V
Input pull-up Ports 2,
–I_P
50
—
300
µA V_in = 0 V
current
4, and 5
Input
NMI
C_in
—
—
50
pF _{VIN = 0 V}
capacitance _{All input pins}
—
—
15
pF ^{f = 1 MHz}
except NMI
T_a = 25°C
Current
Normal
I_CC
—
50
65
mA f = 16 MHz
dissipation^*2 operation
Sleep mode
—
35
50
mA f = 16 MHz
Module
standby mode^*4
—
20
25
mA f = 16 MHz
Standby
mode^*3
—
0.01
5.0
µA T_a ≤ 50°C
—
—
20.0 µA 50°C < T_a
Notes: 1. If the A/D and D/A converters are not used, do not leave the AV_CC, AV_SS, and V_REF pins
open. Connect AV_CC and V_REF to V_CC, and connect AV_SS to V_SS.
2. Current dissipation values are for V_IHmin = V_CC – 0.5 V and V_ILmax = 0.5 V with all output
pins unloaded and the on-chip pull-up transistors in the off state.
3. The values are for V_RAM ≤ V_CC < 4.5 V, V_IHmin = V_CC × 0.9, and V_ILmax = 0.3 V.
4. Module standby current values apply in sleep mode with all modules halted.
5. The high-voltage application criterion level is as shown above. However, in boot mode
and during flash memory write and erase it should be set at 12.0 V to 0.6 V.
675