HD6433044 Datasheet, PDF (45/867 Pages) Hitachi Semiconductor – Hitachi Single-Chip Microcomputer

Table 2-4 Arithmetic Operation Instructions
Instruction Size* Function
ADD,
SUB
B/W/L
Rd ± Rs → Rd, Rd ± #IMM → Rd
Performs addition or subtraction on data in two general registers, or on
immediate data and data in a general register. (Immediate byte data cannot
be subtracted from data in a general register. Use the SUBX or ADD
instruction.)
ADDX,
B
Rd ± Rs ± C → Rd, Rd ± #IMM ± C → Rd
SUBX
Performs addition or subtraction with carry or borrow on data in two general
registers, or on immediate data and data in a general register.
INC,
DEC
B/W/L
Rd ± 1 → Rd, Rd ± 2 → Rd
Increments or decrements a general register by 1 or 2. (Byte operands can
be incremented or decremented by 1 only.)
ADDS,
L
SUBS
Rd ± 1 → Rd, Rd ± 2 → Rd, Rd ± 4 → Rd
Adds or subtracts the value 1, 2, or 4 to or from data in a 32-bit register.
DAA,
DAS
B
Rd decimal adjust → Rd
Decimal-adjusts an addition or subtraction result in a general register by
referring to CCR to produce 4-bit BCD data.
MULXU
B/W Rd × Rs → Rd
Performs unsigned multiplication on data in two general registers: either
8 bits × 8 bits → 16 bits or 16 bits × 16 bits → 32 bits.
MULXS
B/W Rd × Rs → Rd
Performs signed multiplication on data in two general registers: either
8 bits × 8 bits → 16 bits or 16 bits × 16 bits → 32 bits.
Note: * Size refers to the operand size.
B: Byte
W: Word
L: Longword
30