HD6433044 Datasheet, PDF (655/867 Pages) Hitachi Semiconductor – Hitachi Single-Chip Microcomputer

Bit 4—Module Standby 4 (MSTOP4): Selects whether to place SCI0 in standby.
Bit 4
MSTOP4 Description
0
SCI0 operates normally
1
SCI0 is in standby state
(Initial value)
Bit 3—Module Standby 3 (MSTOP3): Selects whether to place SCI1 in standby.
Bit 3
MSTOP3 Description
0
SCI1 operates normally
1
SCI1 is in standby state
(Initial value)
Bit 2—Module Standby 2 (MSTOP2): Selects whether to place the DMAC in standby.
Bit 2
MSTOP2 Description
0
DMAC operates normally
1
DMAC is in standby state
(Initial value)
Bit 1—Module Standby 1 (MSTOP1): Selects whether to place the refresh controller in standby.
Bit 1
MSTOP1 Description
0
Refresh controller operates normally
1
Refresh controller is in standby state
(Initial value)
Bit 0—Module Standby 0 (MSTOP0): Selects whether to place the A/D converter in standby.
Bit 0
MSTOP0 Description
0
A/D converter operates normally
1
A/D converter is in standby state
(Initial value)
646