|
HD6433044 Datasheet, PDF (31/867 Pages) Hitachi Semiconductor – Hitachi Single-Chip Microcomputer | |||
|
◁ |
⢠High-speed operation
â All frequently-used instructions execute in two to four states
â Maximum clock frequency:
18 MHz/16 MHz (flash memory version)
â 8/16/32-bit register-register add/subtract: 111 ns/125 ns (flash memory version)
â 8 Ã 8-bit register-register multiply:
778 ns/875 ns (flash memory version)
â 16 ÷ 8-bit register-register divide:
778 ns/875 ns (flash memory version)
â 16 Ã 16-bit register-register multiply: 1.221 ns/1.375 ns (flash memory version)
â 32 ÷ 16-bit register-register divide:
1.221 ns/1.375 ns (flash memory version)
⢠Two CPU operating modes
â Normal mode (not available in the H8/3048 Series)
â Advanced mode
⢠Low-power mode
Transition to power-down state by SLEEP instruction
2.1.2 Differences from H8/300 CPU
In comparison to the H8/300 CPU, the H8/300H has the following enhancements.
⢠More general registers
Eight 16-bit registers have been added.
⢠Expanded address space
â Advanced mode supports a maximum 16-Mbyte address space.
â Normal mode supports the same 64-kbyte address space as the H8/300 CPU.
(Normal mode is not available in the H8/3048 Series.)
⢠Enhanced addressing
The addressing modes have been enhanced to make effective use of the 16-Mbyte address
space.
⢠Enhanced instructions
â Data transfer, arithmetic, and logic instructions can operate on 32-bit data.
â Signed multiply/divide instructions and other instructions have been added.
16
|
▷ |