HD6433044 Datasheet, PDF (297/867 Pages) Hitachi Semiconductor – Hitachi Single-Chip Microcomputer

9.12 Port B
9.12.1 Overview
Port B is an 8-bit input/output port that is also used for output (TP₁₅ to TP₈) from the
programmable timing pattern controller (TPC), input/output (TIOCB₄, TIOCB₃, TIOCA₄,
TIOCA₃) and output (TOCXB₄, TOCXA₄) by the 16-bit integrated timer unit (ITU), input
(DREQ₁, DREQ₀) to the DMA controller (DMAC), ADTRG input to the A/D converter, and CS₇
output. A reset or hardware standby leaves port B as an input port. Usage of pins for TPC, ITU,
DMAC, and A/D converter input and output is described in the sections on those modules. For
output of CS₇ in modes 1 to 6, see section 6.3.2, Chip Select Signals. Pins not assigned to any of
these functions are available for generic input/output. Figure 9-11 shows the pin configuration of
port B.
Pins in port B can drive one TTL load and a 30-pF capacitive load. They can also drive an LED or
darlington transistor pair. Pins PB₃ to PB₀ have Schmitt-trigger inputs.
284