UPD78F0411GA-GAM-AX Datasheet, PDF (543/564 Pages) Renesas Technology Corp – Old Company Name in Catalogs and Other Documents

CHAPTER 27 ELECTRICAL SPECIFICATIONS (STANDARD PRODUCTS)
Caution The 78K0/LC3 is provided with an on-chip debug function. After using the on-chip debug
function, do not use the product for mass production because its reliability cannot be
guaranteed from the viewpoint of the limit of the number of times the flash memory can be
rewritten. After the on-chip debug function is used, complaints will not be accepted.
Absolute Maximum Ratings (TA = 25°C) (1/2)
Parameter
Supply voltage
REGC pin input voltage
Input voltage
Output voltage
Analog input voltage
Symbol
Conditions
Ratings
Unit
VDD
−0.5 to +6.5
V
VSS
AVREF^{Note 2}
AVSS^{Note 2}
−0.5 to +0.3
V
−0.5 to VDD + 0.3^{Note 1}
V
−0.5 to +0.3
V
VIREGC
VI
VO
VAN
−0.5 to + 3.6
V
and −0.5 to VDD
P12, P13, P20 to P25, P31 to P34,
P40, P100, P101, P112, P113, P120 to
−0.3 to VDD + 0.3^{Note 1}
V
P124, P140 to P143, P150 to P153, X1, X2,
XT1, XT2, FLMD0, RESET
−0.3 to VDD + 0.3^{Note 1}
V
ANI0 to ANI5^{Note 2}
−0.3 to AVREF + 0.3^{Note 1}
V
and −0.3 to VDD + 0.3^{Note 1}
Notes 1. Must be 6.5 V or lower.
2. μPD78F041x only.
Caution Product quality may suffer if the absolute maximum rating is exceeded even momentarily for any
parameter. That is, the absolute maximum ratings are rated values at which the product is on the
verge of suffering physical damage, and therefore the product must be used under conditions that
ensure that the absolute maximum ratings are not exceeded.
Remark Unless specified otherwise, the characteristics of alternate-function pins are the same as those of port pins.
User’s Manual U18698EJ1V0UD
541