UPD78F0411GA-GAM-AX Datasheet, PDF (22/564 Pages) Renesas Technology Corp – Old Company Name in Catalogs and Other Documents

CHAPTER 1 OUTLINE
The list of functions in the 78K0/Lx3 Microcontrollers is shown below.
(1/3)
Part Number
78K0/LC3
78K0/LD3
μPD78F040x
μPD78F041x
μPD78F042x
μPD78F043x
Item
48 Pins
52 Pins
Flash memory (KB)
8 16 24 32 8 16 24 32 8 16 24 32 8 16 24 32
RAM (KB)
0.5 0.75 1 1 0.5 0.75 1 1 0.5 0.75 1 1 0.5 0.75 1 1
Power supply voltage
VDD = 1.8 to 5.5 V
Regulator
Provided
Minimum instruction
execution time
0.2 μs (10 MHz: VDD = 2.7 to 5.5 V)/ 0.4 μs (5 MHz: VDD = 1.8 to 5.5 V)
High-speed system
clock
10 MHz: VDD = 2.7 to 5.5 V/5 MHz: VDD = 1.8 to 5.5 V
Internal high-speed
oscillation clock
8 MHz (TYP.): VDD = 1.8 to 5.5 V
Subclock
32.768 kHz (TYP.): VDD = 1.8 to 5.5 V
Internal low-speed
oscillation clock
240 kHz (TYP.): VDD = 1.8 to 5.5 V
Total
30
34
16 bits (TM0)
8 bits (TM5)
8 bits (TMH)
RTC
WDT
3-wire CSI
UART
UART supporting LIN-
bus
−
1 ch
1 ch^{Note 2}
1 ch
3 ch
3 ch
1 ch
1 ch
1 ch^{Note 1}
1 ch^{Note 1}
1 ch^{Note 3}
Type
Segment signal
Common signal
10-bit successive
approximation type A/D
16-bit ΔΣ type A/D
External
Internal
External resistance division and internal resistance division are switchable.
22 (18)^{Note 4}
24 (20)^{Note 4}
4 (8)^{Note 4}
−
6 ch
−
6 ch
−
5
17
18
19
20
Key interrupt
RESET pin
3 ch
5 ch
Provided
POC
1.59 V ±0.15 V (Time for rising up to 1.8 V : 3.6 ms (MAX.))
LVI
WDT
Clock output
Buzzer output
Remote controller receiver
MCG
The detection level of the supply voltage is selectable in 16 steps.
Provided
−
Provided
−
Provided
Provided
On-chip debug function
Provided
Operating ambient temperature
TA = −40 to +85°C
Notes 1. Since 3-wire CSI and UART are used as alternate-function pins, they must be assigned to either of the
functions for use.
2. The LIN-bus supporting UART pins can be changed to the UART pins (pin numbers 47 and 48).
3. The LIN-bus supporting UART pins can be changed to the 3-wire CSI/UART pins (pin numbers 50 and 51).
4. The values in parentheses are the number of signal outputs when 8com is used.
20
User’s Manual U18698EJ1V0UD