UPD78F0411GA-GAM-AX Datasheet, PDF (439/564 Pages) Renesas Technology Corp – Old Company Name in Catalogs and Other Documents

CHAPTER 17 INTERRUPT FUNCTIONS
Interrupt Default
Type
Priority^{Note 1}
Name
Maskable
20
INTTM52
21
INTTMH2
Software
Reset
22
INTMCG
−
BRK
−
RESET
POC
LVI
WDT
Table 17-1. Interrupt Source List (2/2)
Interrupt Source
Trigger
Match between TM52 and CR52
(when compare register is specified)
Match between TMH2 and CRH2
(when compare register is specified)
End of Manchester code reception
BRK instruction execution
Reset input
Power-on clear
Low-voltage detection^{Note 3}
WDT overflow
Internal/
External
Internal
Vector
Table
Address
0032H
Basic
Configuration
Type^{Note 2}
(A)
0034H
0036H
−
003EH
(D)
−
0000H
−
Notes 1.
2.
3.
The default priority determines the sequence of processing vectored interrupts if two or more maskable
interrupts occur simultaneously. Zero indicates the highest priority and 22 indicates the lowest priority.
Basic configuration types (A) to (D) correspond to (A) to (D) in Figure 17-1.
When bit 1 (LVIMD) of the low-voltage detection register (LVIM) is set to 1.
User’s Manual U18698EJ1V0UD
437