UPD78F0411GA-GAM-AX Datasheet, PDF (529/564 Pages) Renesas Technology Corp – Old Company Name in Catalogs and Other Documents

CHAPTER 25 ON-CHIP DEBUG FUNCTION
Connect the FLMD0 pin as follows when performing self programming by means of on-chip debugging.
Figure 25-2. Connection of FLMD0 Pin for Self Programming by Means of On-Chip Debugging
QB-78K0MINI target connector
78K0/LC3
FLMD0
Port
1 kΩ (recommended)
FLMD0
10 kΩ (recommended)
25.2 On-Chip Debug Security ID
The 78K0/LC3 has an on-chip debug operation control flag in the flash memory at 0084H (see CHAPTER 23
OPTION BYTE) and an on-chip debug security ID setting area at 0085H to 008EH.
When the boot swap function is used, also set a value that is the same as that of 1084H and 1085H to 108EH in
advance, because 0084H, 0085H to 008EH and 1084H, and 1085H to 108EH are switched.
For details on the on-chip debug security ID, refer to the QB-78K0MINI User’s Manual (U17029E).
Address
0085H to 008EH
1085H to 108EH
Table 25-1. On-Chip Debug Security ID
On-Chip Debug Security ID
Any ID code of 10 bytes
User’s Manual U18698EJ1V0UD
527