UPD78F0411GA-GAM-AX Datasheet, PDF (24/564 Pages) Renesas Technology Corp – Old Company Name in Catalogs and Other Documents

CHAPTER 1 OUTLINE
Part Number
Item
Flash memory (KB)
16
RAM (KB)
0.75
Power supply voltage
Regulator
Minimum instruction
execution time
High-speed system
clock
Internal high-speed
oscillation clock
Subclock
Internal low-speed
oscillation clock
Total
78K0/LF3
μPD78F047x
μPD78F048x
μPD78F049x
80 Pins
24 32 48 60 16 24 32 48 60 16 24 32 48
1 1 2 2 0.75 1 1 2 2 0.75 1 1 2
VDD = 1.8 to 5.5 V
Provided
0.2 μs (10 MHz: VDD = 2.7 to 5.5 V)/ 0.4 μs (5 MHz: VDD = 1.8 to 5.5 V)
10 MHz: VDD = 2.7 to 5.5 V/5 MHz: VDD = 1.8 to 5.5 V
8 MHz (TYP.): VDD = 1.8 to 5.5 V
32.768 kHz (TYP.): VDD = 1.8 to 5.5 V
240 kHz (TYP.): VDD = 1.8 to 5.5 V
62
(3/3)
60
2
16 bits (TM0)
8 bits (TM5)
8 bits (TMH)
RTC
WDT
3-wire CSI/UART^Note1
Automatic transmit/
receive 3-wire CSI
UART supporting LIN-
bus ^Note2
Type
Segment signal
Common signal
10-bit successive
approximation type A/D
16-bit ΔΣ type A/D
External
Internal
1 ch
3 ch
3 ch
1 ch
1 ch
1 ch
1 ch
1 ch
External resistance division and internal resistance division are switchable.
40 (36)^Note3
32 (28)^Note3
4 (8)^Note3
−
8 ch
−
3 ch
7
20
21
22
Key interrupt
RESET pin
8 ch
Provided
POC
1.59 V ±0.15 V (Time for rising up to 1.8 V : 3.6 ms (MAX.))
LVI
The detection level of the supply voltage is selectable in 16 steps.
WDT
Clock output/ Buzzer output
Provided
Provided
Remote controller receiver
MCG
Provided
Provided
On-chip debug function
Operating ambient
temperature
Provided
TA = −40 to +85°C
Notes 1. Select either of the functions of these alternate-function pins.
2. The LIN-bus supporting UART pins can be changed to the Automatic transmit/receive 3-wire CSI/UART pins
(pin numbers 75 and 76).
3. The values in parentheses are the number of signal outputs when 8com is used.
22
User’s Manual U18698EJ1V0UD