PIC32MX440F256H-80I Datasheet, PDF (612/646 Pages) Microchip Technology – 64/100-Pin General Purpose and USB 32-Bit Flash Microcontrollers

PIC32MX3XX/4XX
TABLE 30-26: OUTPUT COMPARE MODULE TIMING REQUIREMENTS
AC CHARACTERISTICS
Standard Operating Conditions: 2.3V to 3.6V
(unless otherwise stated)
Operating temperature -40°C ≤ TA ≤ +85°C for Industrial
Param.
No.
Symbol
Characteristics⁽¹⁾
Min. Typical⁽²⁾ Max. Units
Conditions
OC10 TCCF OCx Output Fall Time
—
—
—
nsec See parameter DO32
OC11 TCCR OCx Output Rise Time
—
—
—
nsec See parameter DO31
Note 1: These parameters are characterized but not tested in manufacturing.
2: Data in “Typical” column is at 3.3V, 25°C unless otherwise stated. Parameters are for design guidance only
and are not tested.
FIGURE 30-9:
OC/PWM MODULE TIMING CHARACTERISTICS
OCFA/OCFB
OC20
OC15
OCx
Note: Refer to Figure 30-1 for load conditions.
TABLE 30-27: SIMPLE OC/PWM MODE TIMING REQUIREMENTS
AC CHARACTERISTICS
Standard Operating Conditions: 2.3V to 3.6V
(unless otherwise stated)
Operating temperature -40°C ≤ TA ≤ +85°C for Industrial
Param
No.
Symbol
Characteristics⁽¹⁾
Min Typical⁽²⁾ Max Units
Conditions
OC15
OC20
Note 1:
2:
TFD
Fault Input to PWM I/O
Change
—
—
25
nsec
TFLT
Fault Input Pulse Width
50
—
—
nsec
These parameters are characterized but not tested in manufacturing.
Data in “Typical” column is at 3.3V, 25°C unless otherwise stated. Parameters are for design guidance only
and are not tested.
DS61143E-page 610
Preliminary
© 2008 Microchip Technology Inc.