PIC32MX440F256H-80I Datasheet, PDF (600/646 Pages) Microchip Technology – 64/100-Pin General Purpose and USB 32-Bit Flash Microcontrollers

PIC32MX3XX/4XX
TABLE 30-8: DC CHARACTERISTICS: I/O PIN INPUT SPECIFICATIONS
DC CHARACTERISTICS
Standard Operating Conditions: 2.3V to 3.6V (unless otherwise
stated)
Operating temperature -40°C ≤ TA ≤ +85°C for Industrial
Param.
No.
Symbol
Characteristics
Min.
Typical⁽¹⁾ Max. Units
Conditions
VIL
DI10
DI15
DI16
DI17
DI18
DI19
VIH
DI20
Input Low Voltage
I/O pins:
with TTL Buffer
VSS
— 0.15 VDD VSS
with Schmitt Trigger Buffer
VSS
—
0.2 VDD VSS
MCLR
VSS
—
0.2 VDD V
OSC1 (XT mode)
VSS
—
0.2 VDD V
OSC1 (HS mode)
VSS
—
0.2 VDD V
SDAx, SCLx
VSS
—
0.3 VDD V SMBus disabled
SDAx, SCLx
VSS
—
0.8
V SMBus enabled
Input High Voltage
I/O pins:
with Analog Functions
0.8 VDD
—
VDD
V
Digital Only
0.8 VDD
—
V
with TTL Buffer
0.25VDD + 0.8V —
5.5
VSS
with Schmitt Trigger Buffer 0.8 VDD
—
5.5
VSS
DI25
MCLR
0.8 VDD
—
VDD
V
DI26
OSC1 (XT mode)
0.7 VDD
—
VDD
V
DI27
OSC1 (HS mode)
0.7 VDD
—
VDD
V
DI28
SDAx, SCLx
0.7 VDD
—
VDD
V SMBus disabled
DI29
SDAx, SCLx
2.1
—
VDD
V SMBus enabled,
2.3V ≤ VPIN ≤ VDD
DI30 ICNPU CNxx Pull up Current
50
IIL
Input Leakage Current^(2,3)
250
400
μA VDD = 3.3V, VPIN = VSS
DI50
I/O Ports
—
—
+1
μA VSS ≤ VPIN ≤ VDD,
Pin at high-impedance
DI51
Analog Input Pins
—
—
+1
μA VSS ≤ VPIN ≤ VDD,
Pin at high-impedance
DI55
MCLR
—
—
+1
μA VSS ≤ VPIN ≤ VDD
DI56
OSC1
—
—
+1
μA VSS ≤ VPIN ≤ VDD,
XT and HS modes
Note 1:
2:
3:
Data in “Typical” column is at 3.3V, 25°C unless otherwise stated. Parameters are for design guidance
only and are not tested.
The leakage current on the MCLR pin is strongly dependent on the applied voltage level. The specified
levels represent normal operating conditions. Higher leakage current may be measured at different input
voltages.
Negative current is defined as current sourced by the pin.
DS61143E-page 598
Preliminary
© 2008 Microchip Technology Inc.