PIC32MX440F256H-80I Datasheet, PDF (285/646 Pages) Microchip Technology – 64/100-Pin General Purpose and USB 32-Bit Flash Microcontrollers

PIC32MX3XX/4XX
bit 2
BSTALL: Buffer Stall Enable bit
1 = Buffer STALL enabled
STALL handshake issued if a token is received that would use the BD in the given location (UOWN bit
remains set, BD value is unchanged).
Corresponding EPSTALL bit will get set on any STALL handshake.
0 = Buffer STALL disabled
Address Offset +4
bit 31-0 BUFFER_ADDRESS: Buffer Address bits⁽³⁾
Starting point address of the endpoint packet data buffer.
Note: The individual buffer addresses in the BDT must be physical memory addresses.
© 2008 Microchip Technology Inc.
Preliminary
DS61143E-page 283