PIC32MX440F256H-80I Datasheet, PDF (582/646 Pages) Microchip Technology – 64/100-Pin General Purpose and USB 32-Bit Flash Microcontrollers

PIC32MX3XX/4XX
REGISTER 28-2: DEVCFG0: DEVICE CONFIGURATION REGISTER⁽¹⁾
r-1
r-1
r-1
R/P-1
r-1
r-1
r-1
R/P-1
—
—
—
CP
—
—
—
BWP
bit 31
bit 24
r-1
r-1
r-1
r-1
R/P-1
R/P-1
R/P-1
R/P-1
—
—
—
—
PWP19
PWP18
PWP17
PWP16
bit 23
bit 16
R/P-1
R/P-1
R/P-1
R/P-1
r-1
r-1
r-1
r-1
PWP15
PWP14
PWP13
PWP12
—
—
—
—
bit 15
bit 8
r-1
r-1
r-1
r-1
R/P-1
r-1
R/P-1
R/P-1
—
—
—
—
ICESEL
—
DEBUG1 DEBUG0
bit 7
bit 0
Legend:
R = Readable bit
U = Unimplemented bit
W = Writable bit
P = Programmable bit
-n = Bit Value at POR: (‘0’, ‘1’, x = Unknown)
r = Reserved bit
bit 3
bit 1-0
Note 1:
ICESEL: In-Circuit Emulator/Debugger Communication Channel Select bit
1 = In-Circuit Emulator uses EMUC2/EMUD2 pins; In-Circuit Debugger uses PGC2/PGD2
0 = In-Circuit Emulator uses EMUC1/EMUD1 pins; In-Circuit Debugger uses PGC1/PGD1
DEBUG<1:0>: Background Debugger Enable bits (forced to ‘11’ if code-protect is enabled)
11 = In-Circuit Emulator/Debugger disabled
10 = In-Circuit Emulator/Debugger enabled
01 = Reserved (same as ‘11’ setting)
00 = Reserved (same as ‘11’ setting)
This summary table contains partial register definitions that only pertain to the Debug peripheral. Refer to
the PIC32MX Family Reference Manual (DS61132) for a detailed description of these registers.
DS61143E-page 580
Preliminary
© 2008 Microchip Technology Inc.