PIC32MX440F256H-80I Datasheet, PDF (605/646 Pages) Microchip Technology – 64/100-Pin General Purpose and USB 32-Bit Flash Microcontrollers

PIC32MX3XX/4XX
TABLE 30-18: PLL CLOCK TIMING SPECIFICATIONS (VDD = 2.3V TO 3.6V)
AC CHARACTERISTICS
Standard Operating Conditions: 2.3V to 3.6V
(unless otherwise stated)
Operating temperature -40°C ≤ TA ≤ +85°C for Industrial
Param.
No.
Symbol
Characteristics⁽¹⁾
Min. Typical⁽²⁾ Max. Units
Conditions
OS50 FPLLI
PLL Voltage Controlled
Oscillator (VCO) Input
Frequency Range
4
—
5 MHz ECPLL, HSPLL, MSPLL,
FRCPLL modes
OS51 FSYS
On-Chip VCO System
Frequency
60
—
230 MHz
OS52 TLOCK PLL Start-up Time (Lock Time) —
—
2
ms
OS53 DCLK CLKO Stability (Jitter)
-2
1
2
% Measured over 100 ms
period
Note 1: These parameters are characterized but not tested in manufacturing.
2: Data in “Typical” column is at 3.3V, 25°C unless otherwise stated. Parameters are for design guidance
only and are not tested.
TABLE 30-19: INTERNAL FRC ACCURACY
AC CHARACTERISTICS
Standard Operating Conditions: 2.3V to 3.6V
(unless otherwise stated)
Operating temperature
-40°C ≤ TA ≤ +85°C for industrial
Param.
No.
Characteristics
Min. Typical Max. Units
Conditions
Internal FRC Accuracy @ 8.00 MHz⁽¹⁾
F20
FRC
-2
—
+2
% -40°C ≤ TA ≤ +85°C VDD = 2.3 to 3.6V
Note 1: Frequency calibrated at 25°C and 3.3V. TUN bits can be used to compensate for temperature drift.
TABLE 30-20: INTERNAL RC ACCURACY
AC CHARACTERISTICS
Standard Operating Conditions: 2.3V to 3.6V
(unless otherwise stated)
Operating temperature -40°C ≤ TA ≤ +85°C for Industrial
Param.
No.
Characteristics
Min. Typical Max. Units
Conditions
LPRC @ 31.25 kHz⁽¹⁾
F21
-15
—
+15
%
-40°C ≤ TA ≤ +85°C VDD = 2.3 to 3.6V
Note 1: Change of LPRC frequency as VDD changes.
© 2008 Microchip Technology Inc.
Preliminary
DS61143E-page 603