3069RF-ZTAT Datasheet, PDF (766/1003 Pages) Renesas Technology Corp – RENESAS 16-BIT SINGLE-CHIP MICROCOMPUTER

Item
Test
Symbol Min Typ Max Unit Conditions
Reference
current
During A/D
conversion
AI_CC
—
0.45 0.8
mA
During A/D and
D/A conversion
—
1.8
3.0
mA
RAM standby voltage
V_RAM
3.0
—
—
V
V_CL output
voltage*⁵
Normal operation V_CL
1.5
1.9
2.3
V
V_CC = 5.0V
T = 25°C
a
Notes: 1. If the A/D converter is not used, do not leave the AV_CC, V_REF, and AV_SS pins open.
Connect AV_CC and V_REF to V_CC, and connect AV_SS to V_SS.
2. Current dissipation values are for V_IH min = V_CC – 0.5 V and V_IL max = 0.5 V with all
output pins unloaded and the on-chip MOS pull-up transistors in the off state.
3. I_CC max. (normal operation) = 15 (mA) + 0.15 (mA/(MHz × V)) × V_CC × f
I_CC max. (sleep mode)
= 15 (mA) + 0.13 (mA/(MHz × V)) × V_CC × f
I max. (sleep mode + module standby mode)
CC
= 15 (mA) + 0.07 (mA/(MHz × V)) × V_CC × f
The Typ values for power consumption are reference values.
4. Sum of current dissipation in normal operation and current dissipation in program/erase
operations.
5. This value is applied when the external capacitor of 0.1 µF is connected.
This characteristic does not specify the permissible range of voltage input from the
external circuit but specifies the voltage output by the LSI.
Rev. 5.0, 09/04, page 744 of 978