3069RF-ZTAT Datasheet, PDF (356/1003 Pages) Renesas Technology Corp – RENESAS 16-BIT SINGLE-CHIP MICROCOMPUTER

Bits 6 and 5—Counter Clear 1 and 0 (CCLR1, CCLR0): These bits select how 16TCNT is
cleared.
Bit 6
Bit 5
CCLR1 CCLR0 Description
0
0
16TCNT is not cleared
(Initial value)
1
16TCNT is cleared by GRA compare match or input capture*¹
1
0
16TCNT is cleared by GRB compare match or input capture*¹
1
Synchronous clear: 16TCNT is cleared in synchronization with other
synchronized timers*²
Notes: 1. 16TCNT is cleared by compare match when the general register functions as an output
compare register, and by input capture when the general register functions as an input
capture register.
2. Selected in TSNC.
Bits 4 and 3—Clock Edge 1 and 0 (CKEG1, CKEG0): These bits select external clock input
edges when an external clock source is used.
Bit 4
CKEG1
0
1
Bit 3
CKEG0
0
1
—
Description
Count rising edges
Count falling edges
Count both edges
(Initial value)
When channel 2 is set to phase counting mode, bits CKEG1 and CKEG0 in 16TCR2 are ignored.
Phase counting takes precedence.
Bits 2 to 0—Timer Prescaler 2 to 0 (TPSC2 to TPSC0): These bits select the counter clock of
16TCNT.
Bit 2
TPSC2
0
1
Bit 1
TPSC1
0
1
0
1
Bit 0
TPSC0
0
1
0
1
0
1
0
1
Function
Internal clock: φ
Internal clock: φ/2
Internal clock: φ/4
Internal clock: φ/8
External clock A: TCLKA input
External clock B: TCLKB input
External clock C: TCLKC input
External clock D: TCLKD input
(Initial value)
Rev. 5.0, 09/04, page 334 of 978