3069RF-ZTAT Datasheet, PDF (751/1003 Pages) Renesas Technology Corp – RENESAS 16-BIT SINGLE-CHIP MICROCOMPUTER

Item
Test
Symbol Min Typ Max Unit Conditions
Reference
current
During A/D
conversion
AI_CC
—
0.45 0.8
mA
During A/D and
D/A conversion
—
1.8
3.0
mA
Idle
—
0.05 5.0
µA
DASTE = 0
RAM standby voltage
V_RAM
3.0
—
—
V
V_CL output
voltage*⁵
Normal operation V_CL
1.5
1.9
2.3
V
V_CC = 5.0V
T_a = 25°C
V start
CC
voltage*⁶
V
—
0
CC START
0.8
V
V_CC rise rate*⁶
SV_CC
0.05 —
—
V/ms
Notes: 1. If the A/D converter is not used, do not leave the AV_CC, V_REF, and AV_SS pins open.
Connect AV and V to V , and connect AV to V .
CC
REF
CC
SS
SS
2. Current dissipation values are for V_IH min = V_CC – 0.5 V and V_IL max = 0.5 V with all
output pins unloaded and the on-chip MOS pull-up transistors in the off state.
3.
I
CC
max.
(normal
operation)
=
15
(mA)
+
0.15
(mA/(MHz
×
V))
×
V
CC
×
f
I_CC max. (sleep mode)
= 15 (mA) + 0.13 (mA/(MHz × V)) × V_CC × f
I_CC max. (sleep mode + module standby mode)
=
15
(mA)
+
0.07
(mA/(MHz
×
V))
×
V
CC
×
f
The Typ values for power consumption are reference values.
4. Sum of current dissipation in normal operation and current dissipation in program/erase
operations.
5. This value is applied when the external capacitor of 0.1 µF is connected. This
characteristic does not specify the permissible range of voltage input from the external
circuit but specifies the voltage output by the LSI.
6. These characteristics are applied under the condition in which the RES pin goes low
when powering on.
Rev. 5.0, 09/04, page 729 of 978