3069RF-ZTAT Datasheet, PDF (349/1003 Pages) Renesas Technology Corp – RENESAS 16-BIT SINGLE-CHIP MICROCOMPUTER

Bit 5—Input Capture/Compare Match Interrupt Enable B1 (IMIEB1): Enables or disables
the interrupt requested by the IMFB1 when IMFB1 flag is set to 1.
Bit 5
IMIEB1
0
1
Description
IMIB1 interrupt requested by IMFB1 flag is disabled
IMIB1 interrupt requested by IMFB1 flag is enabled
(Initial value)
Bit 4—Input Capture/Compare Match Interrupt Enable B0 (IMIEB0): Enables or disables
the interrupt requested by the IMFB0 when IMFB0 flag is set to 1.
Bit 4
IMIEB0
0
1
Description
IMIB0 interrupt requested by IMFB0 flag is disabled
IMIB0 interrupt requested by IMFB0 flag is enabled
(Initial value)
Bit 3—Reserved: This bit cannot be modified and is always read as 1.
Bit 2—Input Capture/Compare Match Flag B2 (IMFB2): This status flag indicates GRB2
compare match or input capture events.
Bit 2
IMFB2
0
1
Description
[Clearing condition]
(Initial value)
Read IMFB2 flag when IMFB2 =1, then write 0 in IMFB2 flag
[Setting conditions]
• 16TCNT2 = GRB2 when GRB2 functions as an output compare register
• 16TCNT2 value is transferred to GRB2 by an input capture signal when GRB2
functions as an input capture register
Rev. 5.0, 09/04, page 327 of 978