3069RF-ZTAT Datasheet, PDF (609/1003 Pages) Renesas Technology Corp – RENESAS 16-BIT SINGLE-CHIP MICROCOMPUTER

Table 18.4 (1) Register Configuration
Name
Abbreviation R/W
Initial
Value
Address
Access
Size
Flash code control status
register
FCCS
R, W*¹ H'00*²
H'EE0B0
8
H'80*²
Flash program code select FPCS
register
R/W H'00
H'EE0B1
8
Flash erase code select
register
FECS
R/W H'00
H'EE0B2
8
Flash key code register
FKEY
R/W H'00
H'EE0B4
8
Flash MAT select register FMATS
R/W
H'00*³
H'EE0B5
8
H'AA*³
Flash transfer destination FTDAR
R/W H'00
H'EE0B6
8
address register
RAM control register
RAMCR
R/W H'F0
H'EE077
8
Flash vector address code FVACR
R/W H'00
H'EE0B7
8
control register
Flash vector address data FVADRR
R/W H'00
H'EE0B8
8
register R
Flash vector address data FVADRE
R/W H'00
H'EE0B9
8
register E
Flash vector address data FVADRH
R/W H'00
H'EE0BA
8
register H
Flash vector address data FVADRL
R/W H'00
H'EE0BB
8
register L
Notes: 1. The bits except the SCO bit are read-only bits. The SCO bit is a programming-only bit.
(The value which can be read is always 0.)
2. The initial value is H'00 when the FWE pin goes low.
The initial value is H'80 when the FWE pin goes high.
3. The initial value at initiation in user mode or user program mode is H'00.
The initial value at initiation in user boot mode is H'AA.
Rev. 5.0, 09/04, page 587 of 978