3069RF-ZTAT Datasheet, PDF (358/1003 Pages) Renesas Technology Corp – RENESAS 16-BIT SINGLE-CHIP MICROCOMPUTER

Bits 6 to 4—I/O Control B2 to B0 (IOB2 to IOB0): These bits select the GRB function.
Bit 6
IOB2
Bit 5
IOB1
Bit 4
IOB0
Function
0
0
0
GRB is an output No output at compare match (Initial value)
1
compare register _{0 output at GRB compare match*}1
1
0
1 output at GRB compare match*¹
1
Output toggles at GRB compare match
(1 output in channel 2)*¹ *²
1
0
0
GRB is an input GRB captures rising edge of input
1
compare register _{GRB captures falling edge of input}
1
0
GRB captures both edges of input
1
Notes: 1. After a reset, the output conforms to the TOLR setting until the first compare match.
2. Channel 2 output cannot be toggled by compare match. When this setting is made, 1
output is selected automatically.
Bit 3—Reserved: This bit cannot be modified and is always read as 1.
Bits 2 to 0—I/O Control A2 to A0 (IOA2 to IOA0): These bits select the GRA function.
Bit 2
IOA2
Bit 1
IOA1
Bit 0
IOA0
Function
0
0
0
GRA is an output No output at compare match (Initial value)
1
compare register _{0 output at GRA compare match*}1
1
0
1 output at GRA compare match*¹
1
Output toggles at GRA compare match
(1 output in channel 2)*¹ *²
1
0
0
GRA is an input GRA captures rising edge of input
1
compare register _{GRA captures falling edge of input}
1
0
GRA captures both edges of input
1
Notes: 1. After a reset, the output conforms to the TOLR setting until the first compare match.
2. Channel 2 output cannot be toggled by compare match. When this setting is made, 1
output is selected automatically.
Rev. 5.0, 09/04, page 336 of 978