DRA790 Datasheet, PDF (232/436 Pages) Texas Instruments – Infotainment Applications Processor

DRA790, DRA791
DRA793, DRA797
SPRS968A – AUGUST 2016 – REVISED FEBRUARY 2017
www.ti.com
(1) P = SCLK period.
(2) Clock Modes 1 and 2 are not supported.
(3) The Device captures data on the falling clock edge in Clock Mode 0 and 3, as opposed to the traditional rising clock edge. Although
non-standard, the falling-edge-based setup and hold time timings have been designed to be compatible with standard SPI devices that
launch data on the falling edge in Clock Modes 0 and 3.
PHA=1
cs
Q5
Q4
POL=1
sclk
Q1
Q3 Q2
Q7
d[0]
Q6
Q6
Command Command
Bit n-1
Bit n-2
Q6
Q6
Q8
Write Data
Bit 1
Write Data
Bit 0
d[3:1]
PHA=0
cs
POL=0
sclk
Q7
d[0]
Figure 5-51. QSPI Write (Clock Mode 3)
SPRS85v_TIMING_OSPI1_03
Q5
Q4
Q1
Q2 Q3
Q9 Q6
Command Command
Bit n-1
Bit n-2
Q6
Q6
Q8
Write Data
Bit 1
Write Data
Bit 0
d[3:1]
Figure 5-52. QSPI Write (Clock Mode 0)
SPRS85v_TIMING_OSPI1_04
CAUTION
The I/O Timings provided in this section are valid only for some QSPI usage
modes when the corresponding Virtual I/O Timings or Manual I/O Timings are
configured as described in the tables found in this section.
232 Specifications
Copyright © 2016–2017, Texas Instruments Incorporated
Submit Documentation Feedback
Product Folder Links: DRA790 DRA791 DRA793 DRA797