|
S912XHY128F0VLM Datasheet, PDF (45/802 Pages) Freescale Semiconductor, Inc – S12 Microcontrollers | |||
|
◁ |
Device Overview MC9S12XHY-Family
1.7.3.25 PR1 / IOC0_7 / TXCAN1 / KWR1 â Port R I/O Pins 1
PR[1:0] are a general-purpose input or output pins. They can be conï¬gured as timer (TIM0) channel 7-6.
It can be conï¬gured as the transmit pin TXCAN of the scalable controller area network controller
(CAN1).They can be conï¬gured as keypad wakeup inputs.
1.7.3.26 PR0 / IOC0_6 / RXCAN1 / KWR0 â Port R I/O Pins 0
PR[1:0] are a general-purpose input or output pins. They can be conï¬gured as timer (TIM0) channel 7-6.
It can be conï¬gured as the receive pin RXCAN of the scalable controller area network controller
(CAN1).They can be conï¬gured as keypad wakeup inputs.
1.7.3.27 PP[7:0] / PWM[7:0] / FP[7:0] â Port P I/O Pins [7:0]
PP[7:0] are a general-purpose input or output pins. They can be conï¬gured as frontplane segment driver
output FP[7:0]. They can be conï¬gured as pulse width modulator (PWM) channel 7-0 output.
1.7.3.28 PH[7:4] / FP[26:23] â Port H I/O Pins [7:4]
PH[7:4] are a general-purpose input or output pins. They can be conï¬gured as frontplane segment driver
output FP[26:23].
1.7.3.29 PH3 / SS / FP[22]â Port H I/O Pin 3
PH3 is a general-purpose input or output pin. It can be conï¬gured as frontplane segment driver output
FP[22]. It can be conï¬gured as the slave selection pin SS for the serial peripheral interface (SPI).
1.7.3.30 PH2 / ECLK / SCK / FP[21] â Port H I/O Pin 2
PH2 is a general-purpose input or output pin. It can be conï¬gured as frontplane segment driver output
FP[21]. It can be conï¬gured as the serial clock SCK of the serial peripheral interface (SPI). It can be
conï¬gured to drive the internal bus clock ECLK. ECLK can be used as a timing reference. The ECLK
output has a programmable prescaler.
1.7.3.31 PH1 / MOSI / TXD1 / FP[20] â Port H I/O Pin 1
PH1 is a general-purpose input or output pin. It can be conï¬gured as frontplane segment driver output
FP[20]. It can be conï¬gured as the master output (during master mode) or slave input pin (during slave
mode) MOSI of the serial peripheral interface (SPI).It can be conï¬gured as the transmitpin TXD of serial
communication interface(SCI1).
1.7.3.32 PH0 / MISO / RXD1 / FP[19] â Port H I/O Pin 0
PH0 is a general-purpose input or output pin. It can be conï¬gured as frontplane segment driver output
FP[19]. It can be conï¬gured as the master input (during master mode) or slave output pin (during slave
mode) MISO for the serial peripheral interface (SPI).It can be conï¬gured as the receive pin RXD of serial
communication interface(SCI1).
MC9S12XHY-Family Reference Manual, Rev. 1.01
Freescale Semiconductor
45
|
▷ |