S912XHY128F0VLM Datasheet, PDF (2/802 Pages) Freescale Semiconductor, Inc – S12 Microcontrollers

To provide the most up-to-date information, the revision of our documents on the World Wide Web will be
the most current. Your printed copy may be an earlier revision. To verify you have the latest information
available, refer to:
http://freescale.com/
A full list of family members and options is included in the appendices.
The following revision history table summarizes changes contained in this document.
This document contains information for all constituent modules, with the exception of the CPU. For CPU
information please refer to CPU12-1 in the CPU12 & CPU12X Reference Manual.
Revision History
Date
Jun,3,2010
Jun,11,2010
Mar,25,2011
Revision
Level
0.11
0.12
1.01
Description
update block: TIM SCI PIM Chapter1
update Table A-6., “5-V I/O Characteristics, item 11/12,unit is KΩ and uA
update A.1.10.1, “Typical Run Current Measurement Conditions
update Table A-6., “5-V I/O Characteristics, 4(a) , remove V C contitions
update Table A-6., “5-V I/O Characteristics,4(b), remove temperature
update Table A-10., “Run and Wait Current Characteristics, remove item
update Table A-11., “Pseudo Stop and Full Stop Current,
-10a/10b/11/12/13/14,remove temperature except -40/25/150
-15, change to FSP mode
remove Typeical Run supply table
update Table A-11., “Pseudo Stop and Full Stop Current, add LCP FSP mode
update Appendix electrical parameter
-Table A-6., “5-V I/O Characteristics 4a 9 10 11 12
Table A-11., “Pseudo Stop and Full Stop Current,10a,11a,12a,14,15
-Table A-4./A-721 LCD/Motor Driver pad can only be work under >4.5V
-A.1.3.1/A-718, change to 4.5v to 5.5v
-remove 12 bit resolution at table Table A-12./A-731
update chapter MMC to Ver04.11 3.1/3-157
update chapter MSCAN to Ver03.12
update Table D-2./D-768,all parts has 2x CAN and SCI
update Appendix electrical parameter value
Table A-11., “Pseudo Stop and Full Stop Current,
Table A-9., “Module Run Supply Currents
Table A-6., “5-V I/O Characteristics, item 4b
update Appendix, change classifications or conditions
Table A-6., “5-V I/O Characteristics, item 4b, change from 80c to 150c
Table A-11., “Pseudo Stop and Full Stop Current,item 11b,change from P to C
fix typo Table A-6., “5-V I/O Characteristics, 11 and 12, resistance not current