TCI6630K2L Datasheet, PDF (214/298 Pages) Texas Instruments – Multicore DSP+ARM KeyStone II System-on-Chip

TCI6630K2L
SPRS893E – MAY 2013 – REVISED JANUARY 2015
www.ti.com
10.3 Electrical Characteristics
Over Recommended Ranges of Supply Voltage and Operating Case Temperature (Unless Otherwise Noted)
PARAMETER
TEST
CONDITIONS ⁽¹⁾
MIN
TYP
MAX UNIT
V_OH(2) High-level output voltage
LVCMOS (1.8 V)
DDR3A
I²C ⁽³⁾
I_O = I_OH
DVDD18 - 0.45
DVDD15 - 0.4
V
(3)
V_OL(2) Low-level output voltage
LVCMOS (1.8 V)
DDR3A
I²C
I_O = I_OL
I_O = 3 mA, pulled up
to 1.8 V
0.45
0.4
V
0.4
No IPD/IPU
-10
10
I_I ⁽⁴⁾
Input current [DC]
LVCMOS (1.8 V)
Internal pullup
Internal pulldown
50
-170
100
-100
170 µA
-50
I²C
0.1 × DVDD18 V < V_I
< 0.9 × DVDD18 V
-10
10 µA
I_OH
High-level output current
[DC]
LVCMOS (1.8 V)
DDR3A
I²C ⁽⁵⁾
-6
-8 mA
(5)
LVCMOS (1.8 V)
6
I_OL
Low-level output current [DC] DDR3A
I²C
8 mA
3
I_OZ ⁽⁶⁾
Off-state output current [DC]
LVCMOS (1.8 V)
DDR3A
I²C
-10
10
-10
10 µA
-10
10
(1) For test conditions shown as MIN, MAX, or TYP, use the appropriate value specified in the recommended operating conditions table.
(2) For USB High-Speed, Full-Speed, and Low -Speed modes, USB I/Os adhere to Universal Serial Bus, revision 2.0 standard. For USB
Super-Speed mode, USB I/Os adhere to Universal Serial Bus, revision 3.1 specification, revision 1.0 standard.
(3) I²C uses open collector IOs and does not have a V_OH Minimum.
(4) I_I applies to input-only pins and bidirectional pins. For input-only pins, I_I indicates the input leakage current. For bidirectional pins, I_I
includes input leakage current and off-state (Hi-Z) output leakage current.
(5) I²C uses open collector IOs and does not have a I_OH Maximum.
(6) I_OZ applies to output-only pins, indicating off-state (Hi-Z) output leakage current.
214 Device Operating Conditions
Submit Documentation Feedback
Product Folder Links: TCI6630K2L
Copyright © 2013–2015, Texas Instruments Incorporated