SH7709S Datasheet, PDF (767/807 Pages) Renesas Technology Corp – Renesas 32-Bit RISC Microcomputer Super RISC engine Family/SH7700 Series

Pin
Pin No.
(FP-208C,
FP-208E)
Pin No.
(BP-240A)
I/O
Function
CKIO
162
A15
I/O System clock I/O
XTAL2
4
D1
O Crystal oscillator pin (for on-chip
RTC)
EXTAL2
5
D3
I Crystal oscillator pin (for on-chip
RTC)
CKE/PTK[5]
105
T18
I/O CK enable for SDRAM / I/O port
CA
194
B7
I Setting hardware standby pin
VCCQ
21, 35, 47, 59, H4, M1, R1,
71, 85, 97, U3, V8, U15,
111,
R19, C17,
163, 183
A10, U12
Power Power supply (3.3 V)
supply
VCC–RTC
3
E2
Power RTC oscillator power supply
supply (2.0/1.9/1.8/1.7 V)
VCC–PLL1
145
VCC–PLL2
150
AVCC
205
F16,
E17
A4
Power PLL power supply (2.0/1.9/1.8/1.7 V)
supply
Power Analog power supply (3.3 V)
supply
VSSQ
19, 33, 45, 57, H2, M3, R3,
69, 83, 95, T7, U4, W11,
109,
W14, T19,
161, 181
C16, C10
Power Power supply (0 V)
supply
VCC
29, 81, 134, L3, L4, U11, Power Internal power supply
154, 175
T11, J17, J16, supply (2.0/1.9/1.8/1.7 V)
E18, C19,
C12, D12
VSS
27, 79, 132, K3, K4, U10, Power Internal power supply (0 V)
152, 153, 173 T10, K17,
supply
K16, E19,
D17, D19,
A12, D13
VSS–RTC
6
E1
Power RTC-oscillator power supply (0 V)
supply
VSS–PLL1
147
F18
VSS–PLL2
148
F19
Power PLL power supply (0 V)
supply
AVSS
198, 208
B6, B4
Power Analog power supply (0 V)
supply
Note: Except in hardware standby mode, power must be supplied constantly to all power supply
pins. In hardware standby mode, power must be supplied to Vcc-RTC and Vss-RTC at
least.
Rev. 5.00, 09/03, page 723 of 760