SH7709S Datasheet, PDF (755/807 Pages) Renesas Technology Corp – Renesas 32-Bit RISC Microcomputer Super RISC engine Family/SH7700 Series

23.3.10 AC Characteristics Measurement Conditions
• I/O signal reference level: VccQ/2 (VccQ = 3.3 ± 0.3 V, Vcc = 1.55 to 2.15 V)
• Input pulse level: Vss to 3.0 V (where RESETP, RESETM, ASEND0, IRLS3 to IRLS0, IRL3
to IRL0, ADTRG, PINT15 to PINT0, TRST, RxD1, CA, NMI, IRQ5–IRQ0, CKIO, and
MD5–MD0 are within Vss to Vcc)
• Input rise and fall times: 1 ns
I_OL
LSI output pin
C_L
DUT output
V_REF
I_OH
Notes: 1. C_L is the total value that includes the capacitance of measurement
instruments, etc., and is set as follows for each pin.
30pF: CKIO, RAS, CAS, CS0, CS2–CS6, CE2A, CE2B, BACK
50pF: All other pins
2. I_{OL and} I_OH are the values shown in table 23.3.
Figure 23.59 Output Load Circuit
Rev. 5.00, 09/03, page 711 of 760