SH7709S Datasheet, PDF (458/807 Pages) Renesas Technology Corp – Renesas 32-Bit RISC Microcomputer Super RISC engine Family/SH7700 Series

13.2.6 Date Counter (RDAYCNT)
The date counter (RDAYCNT) is an 8-bit readable/writable register used for setting/counting in
the BCD-coded date section of the RTC. The count operation is performed by a carry for each day
of the hour counter.
The range that can be set is 01–31 (decimal). Errant operation will result if any other value is set.
Carry out write processing after halting the count operation with the START bit in RCR2.
RDAYCNT is not initialized by a power-on reset or manual reset, or in standby mode.
The RDAYCNT range that can be set changes with each month and in leap years. Please confirm
the correct setting.
Bit: 7
—
Initial value: 0
R/W: R
6
5
4
3
2
1
0
—
10 days
1 day
0
—
—
—
—
—
—
R
R/W R/W R/W R/W R/W R/W
13.2.7 Month Counter (RMONCNT)
The month counter (RMONCNT) is an 8-bit readable/writable register used for setting/counting in
the BCD-coded month section of the RTC. The count operation is performed by a carry for each
month of the date counter.
The range that can be set is 00–12 (decimal). Errant operation will result if any other value is set.
Carry out write processing after halting the count operation with the START bit in RCR2.
RMONCNT is not initialized by a power-on reset or manual reset, or in standby mode.
Bit: 7
6
5
4
3
2
1
0
—
—
—
10
months
1 month
Initial value: 0
0
0
—
—
—
—
—
R/W: R
R
R
R/W R/W R/W R/W R/W
Rev. 5.00, 09/03, page 414 of 760