SH7709S Datasheet, PDF (322/807 Pages) Renesas Technology Corp – Renesas 32-Bit RISC Microcomputer Super RISC engine Family/SH7700 Series

SH7709S
A14
A13
A12
A1
CKIO
CKE
CSn
RAS3x
CASx
RD/WR
D15
D0
DQMLU
DQMLL
64M synchronous DRAM
(1M × 16 bit × 4 bank)
A13
A12
A11
A0
CLK
CKE
CS
RAS
CAS
WE
DQ15
DQ0
DQMU
DQML
Figure 10.13 Example of 64-Mbit Synchronous DRAM Connection (16-Bit Bus Width)
Address Multiplexing: Synchronous DRAM can be connected without external multiplexing
circuitry in accordance with the address multiplex specification bits AMX2-AMX0 in MCR. Table
10.13 shows the relationship between the address multiplex specification bits and the bits output at
the address pins.
A25–A17 and A0 are not multiplexed; the original values are always output at these pins.
When A0, the LSB of the synchronous DRAM address, is connected to the SH7709S, it performs
longword address specification. Connection should therefore be made in the following order: with
a 32-bit bus width, connect pin A0 of the synchronous DRAM to pin A2 of the SH7709S, then
connect pin A1 to pin A3; with a 16-bit bus width, connect pin A0 of the synchronous DRAM to
pin A1 of the SH7709S, then connect pin A1 to pin A2.
Rev. 5.00, 09/03, page 278 of 760