SH7709S Datasheet, PDF (379/807 Pages) Renesas Technology Corp – Renesas 32-Bit RISC Microcomputer Super RISC engine Family/SH7700 Series

11.2.3 DMA Transfer Count Registers 0–3 (DMATCR0–DMATCR3)
DMA transfer count registers 0–3 (DMATCR0–DMATCR3) are 24-bit readable/writable registers
that specify the DMA transfer count (bytes, words, or longwords). The number of transfers is 1
when the setting is H'000001, and 16,777,216 (the maximum) when H'000000 is set. During a
DMA transfer, these registers indicate the remaining number of transfers.
In 16-byte transfer, one 16-byte transfer (128 bits) is counted as one.
Writing to upper eight bits in DMATCR is invalid; 0s are read if these bits are read. The write
value should always be 0.
An undefined value will be returned in a reset. The previous value is retained in standby mode.
Bit: 31
30
29
28
27
26
25
24
Initial value: —
—
—
—
—
—
—
—
R/W: R
R
R
R
R
R
R
R
Bit: 23
22
21
20
...
0
...
Initial value: —
—
—
—
...
—
R/W: R/W R/W R/W R/W
...
R/W
Rev. 5.00, 09/03, page 335 of 760